UC知道怎么处理"Cannot flash when memory managers are present"
来源：百度知道 编辑：UC知道 时间：2024/09/20 22:56:03
我纯DOS下在刷BIOS时,他提示:
Cannot flash when memory managers are present
这个怎么处理?
BIOS版本正确无误 网上有这样的说明
"Cannot flash when memory managers are present.
BIOS Setup
If you see this message after you execute Phlash, you must disable the memory manager on your system. To do so, follow the instructions in the following sections.
Disabling Memory Managers
To avoid failure when flashing, you must disable the memory managers that load from CONFIG.SYS and AUTOEXEC.BAT. There are two recommended procedures for disabling the memory managers. One consists of pressing the <F5> key (only if you are using DOS 5.0 or above), and the other requires the creation of a boot diskette."
我大概知道什么意思 可以不会操作
Cannot flash when memory managers are present
这个怎么处理?
BIOS版本正确无误 网上有这样的说明
"Cannot flash when memory managers are present.
BIOS Setup
If you see this message after you execute Phlash, you must disable the memory manager on your system. To do so, follow the instructions in the following sections.
Disabling Memory Managers
To avoid failure when flashing, you must disable the memory managers that load from CONFIG.SYS and AUTOEXEC.BAT. There are two recommended procedures for disabling the memory managers. One consists of pressing the <F5> key (only if you are using DOS 5.0 or above), and the other requires the creation of a boot diskette."
我大概知道什么意思 可以不会操作
电脑格式化对BIOS是没有作用的，BIOS和驱动不是一回事，非专业最好不要随
意更新BIOS，可能是你驱动的问题BIOS程序是存放在ROM(只读)里的 正常的格式化(高低格)不会损伤到它的
格式化后也不必重装BIOS 若要刷新BIOS可用给硬盘放电的方式刷新COMS 。